While you are at the stump removing process it does not mean you need to hook a rope, have it tied to the bumper and off. This is not the right way if you think this is how a stump remover works. The important factor about stump remover is to consider the job size and if the stump has been loosened enough since you might just pull off the bumper, wreck the axle or cut the lawn.
[easyazon-image align=”center” asin=”B000ZLS6AA” locale=”us” height=”210″ src=”http://ecx.images-amazon.com/images/I/31q0jtiYUHL.jpg” width=”215″]
Firstly, the size of what is to be removed needs to considered, check if it is a large tree, a small tree or just a bush. In most of the cases it is possible to handle almost everything excepting a very large tree. However, if at all that is a case due to their size, weight and the spread of the root you might want to consider a tree grinder who can do this job for you for a rental price.
If the woody bush has really thick stems then you need to first cut it down to a manageable size before having to dig. You need to kick-start by digging around the stumps. You do not have to really dig against the stump since the roots are normally denser there. You have to start about a few inches away from the trunk; you also have to be sure you are digging away from then throwing the dirt out of that hole. You have to dig the trench right around the stump as a circle. Before you begin to bare roots you need to make use of the lawn bar. Most of the companies do tend to charge about $500 or even more but never tend to go beyond the thousand dollar mark for trees like walnuts, red oak and hardwoods. Another range varies between 30 to about 60 feet high; the removal stump remover cost for this would be starting from $200 and move up. The stump remover for small trees that grow up to only 30 feet high like mulberry would cost one about $125